Farm equipment welding plans by unknow

Author:unknow
Language: eng
Format: epub
Tags: Electric welding, Agricultural machinery
Publisher: Cleveland
Published: 1958-03-25T05:00:00+00:00

RATCHET

-RATCHET KNEE RELEASE

4 600x16 TIRES a WHEELS SIDE VIFW

HOIST BEAM -4 PIPE

WELD

HOIST REEL BEARING

HOIST REEL - life" PIPE

3 PULLEY

REAR VIEW

HANDWHEEL RATCHET

SPRING

CROSS BRACE

Hfe'Vllfe"*^" ANGLE

KNEE RELEASE LEVER

RATCHET DETAIL

-49-

IMPLEMENT CARRIER

Sfonrefc

SUGGESTED

PROCEDURE

Cut pieces and weld together as indicated. All joints should pivot freely. Adjust length of 1 1/4" pipe and spacing of wooden stop blocks and notches (see brace detail) to provide a lift of one foot or more.

To use carrier, pull behind implement to be moved and back tractor around untilcarrier is directly over the implement. Pull rope whichlets holding stake down. Then back up and pull the rope which unlatches the two notched braces holding up the carrier. Let tractor run forward to lower carrier. Attach chains to implement and fasten to adjustable angle crosspieces of carrier. Back up the tractor causing the implement to be raised clear of the ground. When the notched braces latch, pull ahead to release holding stake. Then pull it up clear and go.

♦

BILL wheels and rubber

OF

MATERIALS

Axle with

tires 24 ft. - 2 1/2" pipe 18 ft. - 2" pipe 4 ft. - 1 1/2" pipe 16 ft. - 1 1/4" pipe 10 ft. - 2 1/2" xl 1/2" x 1/4" angle 20 ft. - 2" x 2" x 1/4" angle 2 ft. - 1 1/2" xl 1/2" x 1/4" angle 1 ft. - 1 1/4" xl 1/4" x 1/4" angle

2" x 1/2" flat iron 1 1/2" x 1/2" flat iron 1 1/2" x 3/8" flat iron 1 1/2" x 1/4" flat iron 1" shafting 3/4" shafting

8 ft.

4 ft.

3 ft.

3 ft.

1 ft.

8 ft.

40 ft. - 1/2" rope

1 pulley

Bolts

Welding Electrode

•

-50-

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.